ICF12003A007V003R;中文规格书,Datasheet资料

 Advance Data Sheet: iCF Series – Non-isolated SMT Power Module iCF Series DC/DC Power Modules 4.5-14V Input, 3A Output Surface Mount Power Module iCF12 power modules perform local voltage conversion from either a 5V or 12V bus. The iCF12003A007V utilizes a low component count that results in both a low cost structure and a high level of performance. The open-frame, compact, surface mountable design features a low profile and weight as well as additional edge plated pads that allow for extremely flexible and robust manufacturing processes. Features • Size – 12.2mm x 12.2 mm x 4.45mm (0.48 in. x 0.48 in. x 0.175 in.) • DOSA Compatible Footprint • Edge plated castellations for forming inspectable solder joints • Surface mountable • Maximum weight 1.5g (0.053 oz) • Up to 16.5W of output power in high ambient temperature, low airflow environments with no power derating • Positive logic on/off • Starts with pre-biased output • Output voltage adjustment – industry standard • Outstanding transient response without the need for external loop tuning components • Constant switching frequency • Remote Sense • Power Good • Full, auto-recovery protection: o Input under voltage o Short circuit o Thermal limit • ISO Certified manufacturing facilities • Patent pending Optional Features • Negative logic on/off • Solder bumping for enhanced solderability on the EPC footprint ©2010 TDK Innoveta Inc. iCF12_3A_Full_Datasheet_091010.doc 9/10/2010 rev 1.1 ℡ (877) 498-0099 1/16 http://oneic.com/

Advance Data Sheet: iCF Series – Non-isolated SMT Power Module Ordering information: Product Identifier Package Size Platform Input Voltage Output Current/ Power Units Main Output Voltage # of Outputs Safety Class Feature Set RoHS Indicator i TDK Innoveta C F iCF 12 4.5V to 14V 003 005- 4.5 003- 3.0 A Amps 007 0.70V to 5.5V V Single - 0 06 See option table - R R=RoHS 6 Compliant 12.19 mm x 12.19 mm Option Table: Feature Set 02 03 06 07 Positive Logic On/Off X X Negative Logic On/Off X X LGA Solder Bumping* x x EPC Solder Bumping* x x Product Label Marking -002 -003 -006 -007 * LGA solder bumping option is recommended for customers using the DOSA standard land grid array footprint and EPC soldering bumping is recommended for customers using the inspectable edge plated castellation pads Product Offering: Code iCF12005A007V iCF12003A007V Input Voltage 4.5V-14V 4.5V-14V Output Voltage 0.70V-5.5V 0.70V-5.5V Output Current 4.5A 3A Maximum Output Power 23W 16.5W Efficiency 94% 94% 3320 Matrix Drive, Suite 100 Richardson, TX 75802 Phone (877) 498-0099 Toll Free (469) 916-4747 Fax (877) 498-0143 Toll Free (214) 239-3101 support@tdkinnoveta.com http://www.tdkinnoveta.com/ ©2010 TDK Innoveta Inc. iCF12_3A_Full_Datasheet_091010.doc 9/10/2010 rev 1.1 ℡ (877) 498-0099 2/16 http://oneic.com/

Advance Data Sheet: iCF Series – Non-isolated SMT Power Module Mechanical Specification: Dimensions are in mm [in]. Unless otherwise specified tolerances are: x.x ± 0.5 [0.02], x.xx ± 0.25 [0.010] -A--A-APin Locations: (bottom view) See ordering information for solder bumping options A DOSA PINS EPC PINS Pin Assignment: PIN FUNCTION PIN FUNCTION 1 2 3 4 5 ON/OFF VIN GND VOUT SENSE 6 7 8 9 10 TRIM GND NC NC PW GOOD ©2010 TDK Innoveta Inc. iCF12_3A_Full_Datasheet_091010.doc 9/10/2010 rev 1.1 ℡ (877) 498-0099 3/16 http://oneic.com/

Advance Data Sheet: iCF Series – Non-isolated SMT Power Module Recommended Footprint (top view): FOR DOSA STANDARD PADS FOR EPC PADS ©2010 TDK Innoveta Inc. iCF12_3A_Full_Datasheet_091010.doc 9/10/2010 rev 1.1 ℡ (877) 498-0099 4/16 http://oneic.com/

Advance Data Sheet: iCF Series – Non-isolated SMT Power Module Absolute Maximum Ratings: Stress in excess of Absolute Maximum Ratings may cause permanent damage to the device. Characteristic Continuous Input Voltage Storage Temperature Operating Temperature Range (Tc) Min -0.25 -55 -40 Max 15 125 115* Unit Vdc ˚C ˚C Notes & Conditions Measured at the location specified in the thermal measurement figure; maximum temperature varies with output current – see curve in the thermal performance section of the data sheet. * Engineering estimate Input Characteristics: Unless otherwise specified, specifications apply over all rated Input Voltage, Resistive Load, and Temperature conditions. Characteristic Operating Input Voltage Maximum Input Current Startup Delay Time from application of input voltage Startup Delay Time from on/off Output Voltage Rise Time Input Reflected Ripple Input Ripple Rejection Turn on input voltage Turn off input voltage *Engineering Estimate Min 4.5 --- --- --- --- --- --- --- --- Typ --- --- 5 5 4 20* 40* 4.2 3.5 Max 14 3.3 --- --- --- --- --- --- --- Unit Vdc A mS mS mS mApp dB V V Notes & Conditions Vin=2.4 to Vin,max; Io=Io,max Vo=0 to 0.1*Vo,set; on/off=on, Io=Io,max, Tc=25˚C Vo=0 to 0.1*Vo,set; Vin=Vi,nom, Io=Io,max,Tc=25˚C Io=Io,max,Tc=25˚C, Vo=0.1 to 0.9*Vo,set See input/output ripple measurement figure; BW=20 MHz @ 120 Hz Caution: The power modules are not internally fused. An external input line normal blow fuse with a maximum value of 10A is required, see the Safety Considerations section of the data sheet. ©2010 TDK Innoveta Inc. iCF12_3A_Full_Datasheet_091010.doc 9/10/2010 rev 1.1 ℡ (877) 498-0099 5/16 http://oneic.com/

Advance Data Sheet: iCF Series – Non-isolated SMT Power Module Electrical Data: Characteristic Output Voltage Initial Setpoint Output Voltage Tolerance Efficiency Vo = 1.2V Vo = 1.5V Vo = 1.8V Vo = 3.3V Vo = 5.0V Line Regulation Load Regulation Output Current Output Current Limiting Threshold Short Circuit Current Output Ripple and Noise Voltage Min -2 -3 --- --- --- --- --- --- --- 0 --- --- --- Typ - - 85 86.5 88 92 93.5 3 6 --- 9 0.5 15 Max +2 +3 --- --- --- --- --- --- --- 3 --- --- --- Unit % % % % % % % mV mV A A A mVpp Notes & Conditions Vo=3.3Vsetting, Vin=Vin,nom; Io=Io,max; Tc = 25˚C Over all rated input voltage, load, and temperature conditions to end of life Vin=5V; Io=Io,max; Tc=25˚C Vin=Vin,min to Vin,max Io=Io,min to Io,max Vo = 0.9*Vo,nom, TcAdvance Data Sheet: iCF Series – Non-isolated SMT Power Module Electrical Characteristics: Typical Efficiency vs. Input Voltage 97Efficiency, h(%)Efficiency, h(%)97959391878500.511.522.53 959391878500.511.522.53Output Current (A)Vin = 7VVin = 14VVin = 12VVin = 9VOutput Current (A)Vin = 12VVin = 9VVin = 14VVin = 4.5V Vo = 3.3V Vo = 5V 92Efficiency, h(%)Efficiency, h(%)90888684828000.511.522.53Output Current (A)Vin = 12VVin = 9VVin = 14VVin = 4.5V918785838179777500.511.522.53Output Current (A)Vin = 12VVin = 14VVin = 4.5V Vo = 1.5V Vin = 9V Vo = 1.8V 918785838179777500.511.522.53Output Current (A)Vin = 12VVin = 9VVin = 14VVin = 4.5V86848280787674727000.511.522.53Output Current (A)Vin = 12VVin = 14VVin = 4.5VEfficiency, h(%)Efficiency, h(%) Vo = 0.7V Vin = 9V Vo = 1.2V ©2010 TDK Innoveta Inc. iCF12_3A_Full_Datasheet_091010.doc 9/10/2010 rev 1.1 ℡ (877) 498-0099 7/16 http://oneic.com/

Advance Data Sheet: iCF Series – Non-isolated SMT Power Module Electrical Characteristics: Typical Power Dissipation vs. Input Voltage 1.6Power Dissipation (W)1.4Power Dissipation (W)1.210.80.60.40.2000.511.522.53Output Current (A)Vin = 7VVin = 14VVin = 12VVin = 9V1.210.80.60.40.2000.511.522.53Output Current (A)Vin = 12VVin = 14VVin = 4.5V Vo = 3.3V Vin = 9V Vo = 5V Power Dissipation (W)1.2Power Dissipation (W)10.80.60.40.2000.511.522.53Output Current (A)Vin = 12VVin = 9VVin = 14VVin = 4.5V10.80.60.40.2000.511.522.53Output Current (A)Vin = 12VVin = 9VVin = 14VVin = 4.5V Vo = 1.5V Vo = 1.8V 1Power Dissipation (W)1Power Dissipation (W)00.511.522.530.80.60.40.200Vin = 14VVin = 4.5V0.5Vin = 12V11.522.53Output Current (A)Vin = 14VVin = 4.5V0.80.60.40.20Output Current (A)Vin = 12VVin = 9V Vo = 0.7V Vin = 9V Vo = 1.2V ©2010 TDK Innoveta Inc. iCF12_3A_Full_Datasheet_091010.doc 9/10/2010 rev 1.1 ℡ (877) 498-0099 8/16 http://oneic.com/

Advance Data Sheet: iCF Series – Non-isolated SMT Power Module Electrical Characteristics: Vert = 5A/div Horz =20ms/div Vert = 5mV/div Horz = 2us/div Vo=1.8V Typical Output Ripple at nominal Input voltage and full load at Ta=25 degrees CH2 = 0.5V/div CH3 = 2V/div Horz = 1ms/div Typical Output Short Circuit Current – CH4, green To be provided in future revision Vert = 20mV/div Horz = 2us/div Vo=1.8V Typical startup characteristic from on/off at full load. Upper trace - output voltage, lower trace – on/off signal Vo=1.8V Typical Input Ripple at nominal Input Voltage and full load at Ta=25 degrees. Input capacitors 2 x 22uF ceramic CH1 = 50mV/div CH2 = 1A/div CH1 = 50mV/div CH2 = 1A/div Horz = 50us/div Horz = 50us/div Vo=1.8V Typical output voltage transient response to load step from 50% to 100% of full load with output current slew rate of 10A/uS. (Cext = 2x22uF ceramic capacitor) Vo=3.3V Typical output voltage transient response to load step from 50% to 100% of full load with output current slew rate of 10A/uS. (Cext = 2x22uF ceramic capacitor) ©2010 TDK Innoveta Inc. iCF12_3A_Full_Datasheet_091010.doc 9/10/2010 rev 1.1 ℡ (877) 498-0099 9/16 http://oneic.com/

Advance Data Sheet: iCF Series – Non-isolated SMT Power Module Electrical Characteristics (continued): 1.82Output Voltage (V)1.81.781.761.741.721.70123456710Output Current (A)Vin = 12VVin = 9VVin = 14VVin = 4.5VOutput Voltage (V)1.811.8051.81.7951.7900.511.522.5Vin = 14VVin = 4.5V3Output Current (A)Vin = 12VVin = 9V Vo=1.8V Typical load regulation Vo=1.8V Typical Current Limit Characteristics 2Output Voltage (V)1.510.50246Io = 0A810Io = 3A1214Input Voltage (V)65.5.3.532.521.510.501234567101112131415Input Voltage (V)Upper LimitLower Limit Vo=1.8V Typical Output Voltage vs. Input Voltage Characteristics Output Voltage versus Input Voltage Operating Range ©2010 TDK Innoveta Inc. iCF12_3A_Full_Datasheet_091010.doc 9/10/2010 rev 1.1 ℡ (877) 498-0099 Output Voltage (V)10/16 http://oneic.com/

分销商库存信息:

TDK-LAMBDA

ICF12003A007V003R