Triple 3ĆInput NAND Gate
•Outputs Source/Sink 24 mA
•′ACT10 Has TTL Compatible Inputs
VCC1413121110981234567GNDMAXIMUM RATINGS*SymbolVCCVinVoutIinIoutICCTstgParameterDC Supply Voltage (Referenced to GND)DC Input Voltage (Referenced to GND)DC Output Voltage (Referenced to GND)DC Input Current, per PinDC Output Sink/Source Current, per PinDC VCC or GND Current per Output PinStorage TemperatureValue–0.5 to +7.0–0.5 to VCC +0.5–0.5 to VCC +0.5±20±50±50–65 to +150UnitVVVmAmAmA°C*Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the RecommendedOperating Conditions.
FACT DATA
5-1
元器件交易网www.cecb2b.comMC74AC10 MC74ACT10RECOMMENDED OPERATING CONDITIONSSymbolVCCVin, VoutSupply VoltageDC Input Voltage, Output Voltage (Ref. to GND)Input Rise and Fall Time (Note 1)′AC Devices except Schmitt InputsInput Rise and Fall Time (Note 2)′ACT Devices except Schmitt InputsJunction Temperature (PDIP)Operating Ambient Temperature RangeOutput Current — HighOutput Current — Low–4025VCC @ 3.0 VVCC @ 4.5 VVCC @ 5.5 Vtr, tfTJTAIOHIOLVCC @ 4.5 VVCC @ 5.5 VParameter′AC′ACTMin2.04.501504025108.014085–2424ns/V°C°CmAmAns/VTyp5.05.0Max6.05.5VCCUnitVVtr, tf1. Vin from 30% to 70% VCC; see individual Data Sheets for devices that differ from the typical input rise and fall times.2. Vin from 0.8 V to 2.0 V; see individual Data Sheets for devices that differ from the typical input rise and fall times.DC CHARACTERISTICS 74ACSymbol ParameterVCC(V) TA = +25°CTypVIHMinimum High LevelInput VoltageMaximum Low LevelInput VoltageMinimum High LevelOutput Voltage3.04.55.53.04.55.53.04.55.53.04.55.5VOLMaximum Low LevelOutput Voltage3.04.55.53.04.55.5IINIOLDIOHDICCMaximum InputLeakage Current†Minimum DynamicOutput CurrentMaximum QuiescentSupply Current5.55.55.55.54.00.0020.0010.0011.52.252.751.52.252.752.994.495.4974ACTA =–40°C to +85°CUnitConditionsGuaranteed Limits2.13.153.850.91.351.652.94.45.42.563.864.860.10.10.10.360.360.36±0.12.13.153.850.91.351.652.94.45.42.463.764.760.10.10.10.440.440.44±1.075–7540VVOUT = 0.1 Vor VCC – 0.1 VVOUT = 0.1 Vor VCC – 0.1 VIOUT = –50 µAV*VIN = VIL or VIH–12 mAIOH–24 mA–24 mAIOUT = 50 µAV*VIN = VIL or VIH12 mAIOL24 mA24 mAVI = VCC, GNDVOLD = 1.65 V MaxVOHD = 3.85 V MinVIN = VCC or GNDVILVVOHVVµAmAmAµA*All outputs loaded; thresholds on input associated with output under test.†Maximum test duration 2.0 ms, one output loaded at a time.Note: IIN and ICC @ 3.0 V are guaranteed to be less than or equal to the respective limit @ 5.5 V VCC.FACT DATA5-2元器件交易网www.cecb2b.comMC74AC10 MC74ACT10AC CHARACTERISTICS (For Figures and Waveforms — See Section 3)74ACSymbolParameterVCC*(V)MintPLHtPHLPropagation DelayPropagation Delay3.35.03.35.01.51.51.51.5TA = +25°CCL = 50 pFTyp6.04.55.54.0Max9.57.08.56.074ACTA = –40°Cto +85°CCL = 50 pFMin1.01.01.01.0Max10.58.010.06.5nsns3-53-5UnitFig.No.*Voltage Range 3.3 V is 3.3 V ±0.3 V.Voltage Range 5.0 V is 5.0 V ±0.5 V.DC CHARACTERISTICS 74ACTSymbol ParameterVCC(V) TA = +25°CTypVIHVILVOHMinimum High LevelInput VoltageMaximum Low LevelInput VoltageMinimum High LevelOutput Voltage4.55.54.55.54.55.54.55.5VOLMaximum Low LevelOutput Voltage4.55.54.55.5IIN∆ICCTIOLDIOHDICCMaximum InputLeakage CurrentAdditional Max. ICC/Input†Minimum DynamicOutput CurrentMaximum QuiescentSupply Current5.55.55.55.55.54.00.60.0010.0011.51.51.51.54.495.4974ACTTA =–40°C to +85°CUnitConditionsGuaranteed Limits2.02.00.80.84.45.43.864.860.10.10.360.36±0.12.02.00.80.84.45.43.764.760.10.10.440.44±1.01.575–7540VVVVOUT = 0.1 Vor VCC – 0.1 VVOUT = 0.1 Vor VCC – 0.1 VIOUT = –50 µA*VIN = VIL or VIH–24 mAIOH–24 mAIOUT = 50 µA*VIN = VIL or VIH24 mAIOL24 mAVI = VCC, GNDVI = VCC –2.1 VVOLD = 1.65 V MaxVOHD = 3.85 V MinVIN = VCC or GNDVVVµAmAmAmAµA*All outputs loaded; thresholds on input associated with output under test.†Maximum test duration 2.0 ms, one output loaded at a time.FACT DATA5-3元器件交易网www.cecb2b.comMC74AC10 MC74ACT10AC CHARACTERISTICS (For Figures and Waveforms — See Section 3)74ACTSymbolParameterVCC*(V)MintPLHtPHLPropagation DelayPropagation Delay5.05.01.01.0TA = +25°CCL = 50 pFTypMax9.09.074ACTTA = –40°Cto +85°CCL = 50 pFMin1.01.0Max10.09.5nsns3-53-5UnitFig.No.*Voltage Range 5.0 V is 5.0 V ±0.5 V.CAPACITANCESymbolCINCPDInput CapacitancePower Dissipation CapacitanceParameterValueTyp4.525UnitpFpFTest Conditions VCC = 5.0 V VCC = 5.0 VFACT DATA5-4元器件交易网www.cecb2b.comMC74AC10 MC74ACT10OUTLINE DIMENSIONSN SUFFIXPLASTIC DIP PACKAGECASE 646–06ISSUE L148B17NOTES:1.LEADS WITHIN 0.13 (0.005) RADIUS OF TRUEPOSITION AT SEATING PLANE AT MAXIMUMMATERIAL CONDITION.2.DIMENSION L TO CENTER OF LEADS WHENFORMED PARALLEL.3.DIMENSION B DOES NOT INCLUDE MOLDFLASH.4.ROUNDED CORNERS OPTIONAL.DIMABCDFGHJKLMNINCHESMINMAX0.7150.7700.2400.2600.1450.1850.0150.0210.0400.0700.100 BSC0.0520.0950.0080.0150.1150.1350.300 BSC0 10 __0.0150.039MILLIMETERSMINMAX18.1619.566.106.603.694.690.380.531.021.782.54 BSC1.322.410.200.382.923.437.62 BSC0 _10 _0.391.01AFCNHGDSEATINGPLANELJKMD SUFFIXPLASTIC SOIC PACKAGECASE 751A–03ISSUE F–A–148–B–17P7 PL0.25 (0.010)MBMNOTES:1.DIMENSIONING AND TOLERANCING PERANSI Y14.5M, 1982.2.CONTROLLING DIMENSION: MILLIMETER.3.DIMENSIONS A AND B DO NOT INCLUDEMOLD PROTRUSION.4.MAXIMUM MOLD PROTRUSION 0.15 (0.006)PER SIDE.5.DIMENSION D DOES NOT INCLUDE DAMBARPROTRUSION. ALLOWABLE DAMBARPROTRUSION SHALL BE 0.127 (0.005) TOTALIN EXCESS OF THE D DIMENSION ATMAXIMUM MATERIAL CONDITION.GC–T–SEATINGPLANERX 45_FD14 PL0.25 (0.010)MKTBSMASJDIMABCDFGJKMPRMILLIMETERSMINMAX8.558.753.804.001.351.750.350.490.401.251.27 BSC0.190.250.100.250 7 __5.806.200.250.50INCHESMINMAX0.3370.3440.1500.1570.0540.0680.0140.0190.0160.0490.050 BSC0.0080.0090.0040.0090 7 __0.2280.2440.0100.019Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regardingthe suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, andspecifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in differentapplications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola doesnot convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components insystems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure ofthe Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any suchunintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmlessagainst all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or deathassociated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.How to reach us:USA/EUROPE: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447MFAX: RMFAX0@email.sps.mot.com –TOUCHTONE (602) 244–6609INTERNET: http://Design–NET.comJAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, Toshikatsu Otsuki, 6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–3521–8315HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298◊FACT DATA5-5*MC74AC10/D*MC74AC10/D
因篇幅问题不能全部显示，请点此查看更多更全内容