HA13165H资料

HA13165H

Multiple Voltage Regulator for Car Audio

REJ03F0223-0100

Rev.1.00 Jan 16, 2007

Description

The HA13165H is a compact multiple voltage regulator for car audio system. This IC has seven output system, these are 5.7 V output for a microcontroller, 7 V output for CD driver, 8.5 V output for audio control, 10 V output for illuminations, 5.0 V output for independent from microcontroller line, and high side switch for remote-ANT and remote-external AMP.

Functions

General

• ACC power monitor circuit is built-in as to detect low voltage. • Low saturation output (PNP output) used for audio output.

• Adjustable voltage for illumination output by changing an external resistor.

Protections

• Output current limit circuit to avoid device destruction caused by shorted output, etc. • High surge input protector against VCC and ACC.

• Built in a thermal shutdown circuit to prevent against the thermal destruction.

Rev.1.00 Jan 16, 2007 page 1 of 9

元器件交易网www.cecb2b.com

HA13165H

Pin Description and Equivalent Circuit

Function Pin No. Pin Name Specification NC Equivalent Circuit Normal Operation Output voltage is VCC-1 V when M or H level to CTRL pin and H level to ANT-CTRL. TSD 0 V 24 V 0 V SurgeInput0 V 1 — — — — — 2 ANT OUT VCC-1 V/500 mA min VccVcc90 kΩ10 kΩ3 ACC IN — Connected to ACC. — — — 45 kΩ15 kΩ 4 VDD OUT 5.7 V/100 mA min VccVccRegular 5.7 V. 5.7 V 5.7 V 0 V 175 kΩ50 kΩ 5 SW5V OUT 5.0 V/100 mA min VDDVccOutput voltage is 5 V when M or H level applied to CTRL pin. Output for ACC detector 0 V 0 V 0 V 6 COMP OUT 5.0 V/100 mA min 0 V 50 kΩ7 ANT CTRL — 5 V (ACC Hi)0 V L: ANT output OFF H: ANT output ON — — — 51 kΩ49 kΩ 8 VCC — Connected to VCC — — — Rev.1.00 Jan 16, 2007 page 2 of 9

元器件交易网www.cecb2b.com

HA13165H

Pin Description and Equivalent Circuit (cont.)

Function Pin No. Pin Name Specification Equivalent Circuit Normal Operation Low battery detect. TSD Detect 24 V DetectSurgeInputNot detect9 BATT DET — VDD250 kΩ10 kΩ10 AUDIO OUT 8.5 V/500 mA min VccVccOutput voltage is 8.5 V when M or H level applied to CTRL pin. 0 V 0 V 0 V 77.3 kΩ12.3 kΩ11 CTRL — L: BIAS OFF M: BIAS ON H: CD ON — — — 65 kΩ35 kΩ12 CD OUT 7.0 V/1.3 A min VccVccOutput voltage is 7 V when H level applied to CTRL pin. 0 V 0 V 0 V 64.7 kΩ12.4 kΩ 13 14 ILM AJ ILM OUT — 10.0 V/500 mA min VccVccAdjustment pin for ILM output voltage. Output voltage is 10 V when M or H level applied to CTRL pin — — — 0 V 0 V 0 V 33.4 kΩ5 kΩ 15 GND — Connected to GND — — — Rev.1.00 Jan 16, 2007 page 3 of 9

元器件交易网www.cecb2b.com

HA13165H

Timing Chart

VCC8.5 V9.25 VVDDOUTCTRLANTCTRLAUDIOOUTCDOUTILMOUTSW5VOUTANTOUTACCINCOMPOUT2.8 V2.5 VB.DET current

Rev.1.00 Jan 16, 2007 page 4 of 9

元器件交易网www.cecb2b.com

HA13165H

Block Diagram

+BACC+−BATT.DETVCC83ACC IN9ANT OUT0.1 µF2Surge protector+−1BIASANT CTRLCTRL711TSD+−6COMP OUT4VDD OUT0.1 µFCD OUT0.1 µF125SW5V OUTAUDIO OUT+10 µF10+−+−14ILM OUT0.1 µF−+15GNDGNDTAB13ILM AJ

Rev.1.00 Jan 16, 2007 page 5 of 9

元器件交易网www.cecb2b.com

HA13165H

Absolute Maximum Ratings

(Ta = 25°C)

Item Symbol Rating Unit Note Operating power supply voltage Vcc 18 V DC supply voltage Peak voltage Power dissipation Junction temperature Operating temperature Storage temperature

Vcc(DC) Vcc(PEAK) Pd Tj Topr Tstg

24 50 36 150 –40 to +85 –55 to +125

V V

1 2

W 3

°C °C °C Notes: Recommended power supply voltage range 10 to 16 V. 1. Applied time is less than 60 s. 2. Surge pulse as input. 3. Ta = 25°C. : Permissible power dissipation when using a heat sink of infinite area. Refer to the derating

curves below.

20Power dissipation Pd (W)15thin = 1.6 mm, 100 cm󰀁 Aluminum heat sink11.0 W108.7 W5w/o heat sink255075100125150175thin = 1.6 mm, 50 cm󰀁 Aluminum heat sink1.8 W00Ambient temperature Ta (°C)

Rev.1.00 Jan 16, 2007 page 6 of 9

元器件交易网www.cecb2b.com

HA13165H

Electrical Characteristics

(unless otherwise noted, Vcc = 13.2 V, Ta = 25°C)

Item SymbolStandby current IST CTRL L level (STBY mode) VCL CTRL M level (CD OFF mode) CTRL H level (CD ON mode) ANT CTRL L level (ANT OFF mode) ANT CTRL H level (ANT ON mode) VDD OUT

Output voltage Voltage regulation Load regulation

Minimum I/O voltage differential

Output current capacity Ripple rejection ratio

CD OUT

Output voltage Voltage regulation Load regulation

Minimum I/O voltage differential

Output current capacity Ripple rejection ratio

AUDIO OUT

Output voltage Voltage regulation Load regulation

Minimum I/O voltage differential

Output current capacity Ripple rejection ratio

ILM OUT

Output voltage Voltage regulation Load regulation

Minimum I/O voltage differential

Output current capacity Ripple rejection ratio

ANT OUT SW5V OUT ACC OUT

Differential I/O voltage Load regulation Output current capacity Output voltage Output current capacity Output voltage Output current capacity Rise threshold voltage Hysteresis range Threshold voltage Hysteresis range

Output current capacity

VCM VCH VACL VACH Vo1 ∆Vo11 ∆Vo12 ∆Vo13 Io1 SVR1 Vo2 ∆Vo21 ∆Vo22 ∆Vo23 Io2 SVR2 Vo3 ∆Vo31 ∆Vo32 ∆Vo33 Io3 SVR3 Vo4 ∆Vo41 ∆Vo42 ∆Vo43 Io4 SVR4 ∆Vo51 ∆Vo52 Io5 Vo6 Io6 Vo7 Io7 VTHH7

Min— 0 2.0 4.0 0 3.0 5.45— — — 10050 6.7 — — — 1.3 45 8.0 — — — 50040 9.35— — — 50032 — — 5004.6 1004.6 1002.6

Typ MaxUnit460 700 µA — 1.0 V — — — — 5.7 10 50 1.0 250 60 7.0 40 70 1.0 2.0 50 8.5 30 100 0.4 850 50 9.85 40 50 1.0 900 40 1.0 350 900 5.0 300 5.0 300 2.8

3.0 – 2.0 – 5.9550 100 1.5 — — 7.3 100 150 1.5 — — 9.0 90 200 0.9 — — 10.35100 100 1.5 — — 1.5 600 — 5.4 — 5.4 — 3.0

V V V V V mV mV V mA dB V mV mV V A dB V mV mV V mA dB V mV mV V mA dB V mV mA V mA V mA V

Test Condition ACC = 0 V, CTRL = 0 V

Io1 = 80 mA

Vcc = 10 to 16 V, Io1 = 80 mA Io1 = 0 to 80 mA Io1 = 80 mA

Vo1 ≥ 5.45 V

f = 100 Hz, Io1 = 80 mA Io2 = 1.0 A

Vcc = 10 to 16V, Io2 = 1.0 A Io2 = 10m to 1.0 A Io2 = 1.0 A

Vo2 ≥ 6.7 V

f = 100 Hz, Io2 = 1.0 A Io3 = 400 mA

Vcc = 10 to 16 V, Io3 = 400 mA Io3 = 10 to 400 mA Io3 = 400 mA

Vo3 ≥ 8.0 V

f = 100 Hz, Io3 = 400 mA Io4 = 400 mA

Vcc = 12.5 to 16 V, Io4 = 400 mA Io4 = 10 to 400 mA Io4 = 400 mA

Vo4 ≥ 9.35 V

f = 100 Hz, Io4 = 400 mA Io5 = 500 mA

Io5 = 10 to 500 mA

Vo5 ≥ 11.7 V

Io6 = 80 mA, VDD = no load Vo6 ≥ 4.6 V

Io7 = 40 mA, VDD = no load Vo7 ≥ 4.6 V

BATT. DET

∆VTH7 0.2 0.3 0.4 V VTHH8 8.3 8.6 8.9 V ∆VTH8 0.55Io8 200

0.75 0.95— —

V µA Vo = 0.3 V

Rev.1.00 Jan 16, 2007 page 7 of 9

元器件交易网www.cecb2b.com

HA13165H

Evaluation Circuit

HA13165HNC1ANTOUT2ACCIN3VDDOUT4SW5VCOMPANTOUTOUTCTRL567VCC8BATTAUDIODETOUTCTRL91011CDOUT12ILMAJ13ILMOUT14GND15C20.1µFC30.1µFC8+C910µF0.1µFC100.1µFANTVDDSW5VCOMPBATT.DETAUDIOCDILMSW1SW4C6C7+SW2SW3R23.3 kΩ0.1µFR33.3 kΩ100µFACCANT CTRLVCCCTRL5V

Rev.1.00 Jan 16, 2007 page 8 of 9

元器件交易网www.cecb2b.com

HA13165H

Package Dimensions

JEITA Package CodeP-HSIP15-14.3x19.66-1.27RENESAS CodePRSS0015DA-CPrevious CodeSP-15TGVMASS[Typ.]3.0gUnit : mm20.5MAX19.6619.0±0.33.3MiN TYP 3.53.8MAXφ3.6±0.22-C3.0±0.21.1MiN TYP 1.281.50MAX11.3±033.0±027.813.80.25*1+0.10-0.051.11±0.250.6±0.11.27±0.25*12.54±0.251.8±0.253.5±0.5*16.04±0.5*1Note) 1. Dimension \"*1\" is the value after bending.( Ni/Pd/Au plating )17.9

Rev.1.00 Jan 16, 2007 page 9 of 9

元器件交易网www.cecb2b.com

Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, JapanNotes:1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples.3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations.4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com )5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document.6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above.8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges.10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment.12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries. RENESAS SALES OFFICESRefer to \"http://www.renesas.com/en/network\" for the latest and detailed information.Renesas Technology America, Inc.450 Holger Way, San Jose, CA 95134-1368, U.S.ATel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe LimitedDukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900http://www.renesas.comRenesas Technology (Shanghai) Co., Ltd.Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898 Renesas Technology Hong Kong Ltd.7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd.10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology Singapore Pte. Ltd.1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd.Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, KoreaTel: <82> (2) 796-3115, Fax: <82> (2) 796-2145 Renesas Technology Malaysia Sdn. BhdUnit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, MalaysiaTel: <603> 7955-9390, Fax: <603> 7955-9510

© 2007. Renesas Technology Corp., All rights reserved. Printed in Japan.

Colophon .7.0