KSP2907ATA;KSP2907ABU;KSP2907ATF;KSP2907ACTA;KSP2907ACBU;中文规格书,Datasheet资料

KSP2907A

PNP General Purpose Amplifier

Features

•Collector-Emitter Voltage: VCEO= 60V

•Collector Power Dissipation: PC (max)=625mW

•Suffix “-C” means a Center Collector (1.Emitter 2.Collector 3.Base)•Non suffix “-C” means a Side Collector (1.Emitter 2.Base 3.Collector)•Available as PN2907A

1 2 3

tm

TO-92

KSP2907A : 1. Emitter 2. Base 3. Collector KSP2907AC : 1. Emitter 2. Collector 3. Base

Absolute Maximum Ratings * T = 25°C unless otherwise noted

a

SymbolVCBOVCEOVEBOICTJTstg

ParameterCollector-Base VoltageCollector-Emitter VoltageEmitter-Base VoltageCollector currentJunction TemperatureStorage TemperatureValue-60-60-5-600+150-55 ~ +150UnitsVVVmA°C°C* 1. These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.

2. These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.

Thermal Characteristics T=25°C unless otherwise noted

a

SymbolPCRθJCRθJA

ParameterCollector Power Dissipation, by RθJA

Thermal Resistance, Junction to Case(note1)Thermal Resistance, Junction to Ambient(note2)Max62583.3200UnitsmW°C/W°C/WNote1. Infinite heat sink.

Note2. Minimum Land pad size.

Electrical Characteristics * T = 25°C unless otherwise noted

a

SymbolV(BR)CBOV(BR)CEOV(BR)EBOICBOhFE

ParameterCollector-Base Breakdown VoltageCollector-Emitter Breakdown VoltageEmitter-Base Breakdown VoltageCollector Cutoff CurrentDC Current GainTest ConditionIC = -10µA, IE = 0IC = -10mA, IB = 0IE = -10µA, IC = 0VCB = -50V, IE = 0

VCE = -10V, IC = -0.1mA, VCE = -10V, IC = -1mA, VCE = -10V, IC = -10mA, VCE = -10V, IC = -150mA, VCE = -10V, IC = -500mA, IC = -150mA, IB = -15mAIC = -500mA, IB = -50mAIC = -150mA, IB = -15mAIC = -500mA, IB = -50mA

VCB = -10V, IE = 0, f = 1.0MHzIC = -50mA, VCE = -20V, f = 100MHz

VCC= -30V, IC = -150mA, IB1= -15mAVCC= -6V, IC = -150mA,IB1= IB1 = -15mAMin.-60-60-5.0Typ.Max.UnitsVVVnA

-10

7510010010050

300-0.4-1.6-1.3-2.68

VVVVpFMHznsnsVCE(sat)VBE(sat)CobofTtONtOFF

Collector-Emitter Saturation VoltageBase-Emitter Saturation VoltageOutput Capacitance

Current Gain Bandwidth ProductTurn On TimeTurn Off Time20045100* DC Item are tested by Pulse Test: Pulse Width≤300us, Duty Cycle≤2%

©2006 Fairchild Semiconductor Corporation1www.fairchildsemi.com

KSP2907A Rev. E

KSP2907A PNP General Purpose AmplifierPackage Marking and Ordering Information

Device(note)

KSP2907ABUKSP2907ACBUKSP2907ATAKSP2907ACTAKSP2907ATF

Device Marking

KSP2907AKSP2907ACKSP2907AKSP2907ACKSP2907A

Package

TO-92TO-92TO-92TO-92TO-92

Packing Method

BULKBULKTAPE & AMMOTAPE & AMMOTAPE & REEL

Qty(pcs)

----2,0002,0002,000

Pin Definitions

1.Emitter 2.Base 3.Collector1.Emitter 2.Collector 3.Base1.Emitter 2.Base 3.Collector1.Emitter 2.Collector 3.Base1.Emitter 2.Base 3.Collector

Note : Affix “-C-” - center collector pin.

Suffix “-BU” - Bulk packing, straight lead form.(see package dimensions)

Suffix “-TF” - Tape& Reel packing, 0.200 In-Line Spacing lead form. (see package dimensions) SUffix “-TA” - Tape& AMMO packing, 0.200 In-Line Spacing lead form. (see package dimensions)

KSP2907A Rev. E

2www.fairchildsemi.com

KSP2907A PNP General Purpose AmplifierTypical CharacteristicsVBE(sat), VCE(sat)[V], SATURATION VOLTAGE 1000 -10VCE = -10VIC = 10 IBhFE, DC CURRENT GAIN-1VBE(sat)100 -0.1VCE(sat)-0.01-1-10-100-100010-1-10-100-1000IC[A], COLLECTOR CURRENTIC[mA], COLLECTOR CURRENTFigure 1. DC current GainFigure 2. Collector-Emitter Saturation VoltageBase-Emitter Saturation Voltage 1001000 IE = 0f = 1MHz fT[MHz], CURRENT GAIN BANDWIDTH PRODUCTVCE = -20VCob [pF], CAPACITANCE101 0.110-1-10-100-1-10-100-1000VCB [V], COLLECTOR-BASE VOLTAGEIC[mA], COLLECTOR CURRENTFigure 3. Output CapacitanceFigure 4. Current Gain Bandwidth ProductKSP2907A Rev. E

3www.fairchildsemi.com

100 KSP2907A PNP General Purpose AmplifierPackage DimensionsTO-92 Straight Lead Form4.58–0.15+0.250.46±0.1014.47±0.404.58±0.201.27TYP[1.27±0.20]3.60±0.203.86MAX1.27TYP[1.27±0.20]0.38–0.05+0.101.02±0.100.38–0.05+0.10(R2.29)(0.25)Dimensions in MillimetersDimensions in MillimeTO-92 0.200 In-Line Spacing Lead Form Dimensions in Inches[Millimeters]KSP2907A Rev. E

4www.fairchildsemi.com

KSP2907A PNP General Purpose AmplifierTRADEMARKS

The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.

ACEx™

ActiveArray™Bottomless™Build it Now™CoolFET™

CROSSVOLT™DOME™

EcoSPARK™E2CMOS™EnSigna™FACT™FAST®FASTr™FPS™FRFET™

FACT Quiet Series™GlobalOptoisolator™GTO™HiSeC™I2C™i-Lo™

ImpliedDisconnect™IntelliMAX™ISOPLANAR™LittleFET™

MICROCOUPLER™MicroFET™MicroPak™MICROWIRE™MSX™MSXPro™

Across the board. Around the world.™The Power Franchise®

Programmable Active Droop™

OCX™OCXPro™OPTOLOGIC®OPTOPLANAR™PACMAN™POP™

Power247™PowerEdge™PowerSaver™PowerTrench®QFET®QS™

QT Optoelectronics™Quiet Series™RapidConfigure™RapidConnect™µSerDes™ScalarPump™

SILENT SWITCHER®SMART START™SPM™Stealth™SuperFET™SuperSOT™-3SuperSOT™-6SuperSOT™-8SyncFET™TCM™

TinyBoost™TinyBuck™TinyPWM™TinyPower™TinyLogic®TINYOPTO™TruTranslation™UHC™

UltraFET®UniFET™VCX™Wire™

DISCLAIMER

FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPE-CIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.As used herein:

1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.

2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.

PRODUCT STATUS DEFINITIONSDefinition of Terms

Datasheet Identification

Advance Information

Product Status

Formative or In Design

Definition

This datasheet contains the design specifications forproduct development. Specifications may change inany manner without notice.

This datasheet contains preliminary data, and

supplementary data will be published at a later date.Fairchild Semiconductor reserves the right to makechanges at any time without notice in order to improvedesign.

This datasheet contains final specifications. FairchildSemiconductor reserves the right to make changes atany time without notice in order to improve design.

PreliminaryFirst Production

No Identification NeededFull Production

ObsoleteNot In Production

This datasheet contains specifications on a productthat has been discontinued by Fairchild semiconductor.The datasheet is printed for reference information only.

Rev. I20

5

KSP2907A Rev. E

www.fairchildsemi.com

分销商库存信息:

FAIRCHILDKSP2907ATAKSP2907ACTA

KSP2907ABUKSP2907ACBU

KSP2907ATF