1n40xx

1N4004 and 1N4007 are Preferred Devices

Axial Lead StandardRecovery Rectifiers

This data sheet provides information on subminiature size, axiallead mounted rectifiers for general–purpose low–power applications.

Mechanical Characteristics

http://onsemi.com

•Case: Epoxy, Molded

•Weight: 0.4 gram (approximately)•Finish: All External Surfaces Corrosion Resistant and Terminal••••••Leads are Readily SolderableLead and Mounting Surface Temperature for Soldering Purposes:220°C Max. for 10 Seconds, 1/16″ from caseShipped in plastic bags, 1000 per bag.Available Tape and Reeled, 5000 per reel, by adding a “RL” suffix tothe part numberAvailable in Fan–Fold Packaging, 3000 per box, by adding a “FF”suffix to the part numberPolarity: Cathode Indicated by Polarity BandMarking: 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006,1N4007LEAD MOUNTED RECTIFIERS

50–1000 VOLTSDIFFUSED JUNCTION

CASE 59–03AXIAL LEADPLASTICMARKING DIAGRAMAL1N400xYYWWAL= Assembly Location1N400x= Device Numberx= 1, 2, 3, 4, 5, 6 or 7YY= YearWW= Work Week1N40044001N40056001N40068001N40071000UnitVoltsMAXIMUM RATINGSRating*Peak Repetitive Reverse VoltageWorking Peak Reverse VoltageDC Blocking Voltage*Non–Repetitive Peak Reverse Voltage(halfwave, single phase, 60 Hz)*RMS Reverse Voltage*Average Rectified Forward Current(single phase, resistive load,60 Hz, TA = 75°C)*Non–Repetitive Peak Surge Current(surge applied at rated loadconditions)Operating and Storage JunctionTemperature Range*Indicates JEDEC Registered DataSymbolVRRMVRWMVRVRSMVR(RMS)IO1N4001501N40021001N40032006035120702401404802801.072042010005601200700VoltsVoltsAmpIFSM30 (for 1 cycle)AmpTJTstg–65 to +175°CORDERING INFORMATIONSee detailed ordering and shipping information on page 2 ofthis data sheet.Preferred devices are recommended choices for future useand best overall value.

© Semiconductor Components Industries, LLC, 20011

March, 2001 – Rev. 7

Publication Order Number:

1N4001/D

1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007

ELECTRICAL CHARACTERISTICS*

RatingMaximum Instantaneous Forward Voltage Drop(iF = 1.0 Amp, TJ = 25°C)Maximum Full–Cycle Average Forward Voltage Drop(IO = 1.0 Amp, TL = 75°C, 1 inch leads)Maximum Reverse Current (rated dc voltage)(TJ = 25°C)(TJ = 100°C)Maximum Full–Cycle Average Reverse Current(IO = 1.0 Amp, TL = 75°C, 1 inch leads)*Indicates JEDEC Registered DataSymbolvFVF(AV)IR0.051.0IR(AV)–105030µATyp0.93–Max1.10.8UnitVoltsVoltsµAORDERING & SHIPPING INFORMATION

Device1N40011N4001FF1N4001RL1N40021N4002FF1N4002RL1N40031N4003FF1N4003RL1N40041N4004FF1N4004RL1N40051N4005FF1N4005RL1N40061N4006FF1N4006RL1N40071N4007FF1N4007RLPackageAxial LeadAxial LeadAxial LeadAxial LeadAxial LeadAxial LeadAxial LeadAxial LeadAxial LeadAxial LeadAxial LeadAxial LeadAxial LeadAxial LeadAxial LeadAxial LeadAxial LeadAxial LeadAxial LeadAxial LeadAxial LeadShipping1000 Units/Bag3000 Units/Box5000/Tape & Reel1000 Units/Bag3000 Units/Box5000/Tape & Reel1000 Units/Bag3000 Units/Box5000/Tape & Reel1000 Units/Bag3000 Units/Box5000/Tape & Reel1000 Units/Bag3000 Units/Box5000/Tape & Reel1000 Units/Bag3000 Units/Box5000/Tape & Reel1000 Units/Bag3000 Units/Box5000/Tape & Reelhttp://onsemi.com

2

1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007

PACKAGE DIMENSIONS

AXIAL LEADCASE 59–03ISSUE M

BKFDNOTES:

1.ALL RULES AND NOTES ASSOCIATED WITHJEDEC DO-41 OUTLINE SHALL APPLY.2.POLARITY DENOTED BY CATHODE BAND.3.LEAD DIAMETER NOT CONTROLLED WITHIN FDIMENSION.

DIMABDFKMILLIMETERSMINMAX4.075.202.042.710.710.86---1.2727.94---INCHESMINMAX0.1600.2050.0800.1070.0280.034---0.0501.100---AFKhttp://onsemi.com

3

1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changeswithout further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particularpurpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/orspecifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must bevalidated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applicationsintended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury ordeath may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and holdSCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonableattorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claimalleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.

PUBLICATION ORDERING INFORMATION

CENTRAL/SOUTH AMERICA:

Spanish Phone:303–308–7143 (Mon–Fri 8:00am to 5:00pm MST)

Email:ONlit–spanish@hibbertco.com

Toll–Free from Mexico: Dial 01–800–288–2872 for Access –

then Dial 866–297–9322ASIA/PACIFIC: LDC for ON Semiconductor – Asia Support

Phone:303–675–2121 (Tue–Fri 9:00am to 1:00pm, Hong Kong Time)

Toll Free from Hong Kong & Singapore:001–800–4422–3781

Email: ONlit–asia@hibbertco.com

JAPAN: ON Semiconductor, Japan Customer Focus Center

4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031Phone: 81–3–5740–2700Email: r14525@onsemi.comON Semiconductor Website: http://onsemi.comFor additional information, please contact your localSales Representative.http://onsemi.com41N4001/D