洁净空调安装验证-冷冻水管道水压试验(双语版)

Beijing Austar Pharma Packaging Material

Document Number & Revision BJMC_02_01_AHU11_IQT_CWPT_1.0

Chilled Water Pipe Pressure Test for AHU11

Project Phase Project Name Project No. Plant / Building Unit / Equipment Document Code Revision Approval of Test Scope Name Mark Hu

Signature Reason Author Department / Function Project Manager Date Signature DQ IQ OQ PQ ____________ Extension of Film Facility HuaiRou BJMCFP201003 Huai Rou / PCM2 HVAC /AHU11 BJMC_02_01_AHU11_IQT_CWPT 1.0 Chiller Water Pipe Pressure Test for AHU11 Page 1 of 2

BJMC

Beijing Austar Pharma Packaging Material

Document Number & Revision BJMC_02_01_AHU11_IQT_CWPT_1.0

Chilled Water Pipe Pressure Test for AHU11 Check Description Generally Check 总的检查 Acceptance Criteria - Low pressure air leakage test has been completed before the test. - There is no leakage in low pressure air leakage test. - Random inspection the weld, their quality should be compliance with Chinese state construction acceptation code. - Water pressure test has been performed according Chinese state construction acceptation code, compliance with relative technology specification. - A detailed water pressure test report written by constructor is attached. - 在水压试验前要做一个低压的气密性试验； - 在气密性试验中无泄漏； - 抽查焊口质量，符合国家施工验收规范； - 水压试验按国家施工验收规范执行，符合相关技术规范； - 详细的，由施工方填写的水压试验报告是本文件的附件； Result Checked by /Date

Comments:

Viewed by/Date:

Chiller Water Pipe Pressure Test for AHU11 Page 2 of 2